|
|
 |
Introduction |
|
How The System Works |
|
Technology |
|
Features |
 |
Specifications |
 |
Manufacturing |
|
Product Sheets |
|
CO Poisoning |
| UltraGuard Control Unit | ||||
| Power: | 16VAC to 18VAC or 24VDC(battery backup power supply) |
|||
| Current Draw: | 0.055A with no alarm or fault condition 0.52A Max |
|||
| Relay Contacts: | ||||
| Furnace Relay | 16A 250VAC | |||
| Alarm Panel Outputs | 1A max | |||
| Operating Temperature: | 0 – 50°C (32-122°F) | |||
| Operating Humidity: | 15 – 95% RH | |||
| Loud Local Alarm: | 85 db at 10 feet | |||
| Mounting: | Flush installation with 3-wide box | |||
| Certification: | UL2017 | |||
| Four Zones: | Each zone can monitor up to five CO Detectors, up to 7 Detectors total | |||
| Housing: | Three Gang Switch Box (Included) | |||
| UltraGuard CO Sensors | ||||
| Power: | 12Vdc nominal (8 V min, 16 V max) | |||
| Current Draw: | Standby 20mA. Alarm 60mA. Trouble 30mA. |
|||
| Field Wiring: | 20 – 24 AWG | |||
| Relay Contacts: | Dry form C (100 A – 0.1A, 12VDC) non-latching |
|||
| Operating Temperature: | 0 – 50°C (32-122°F) | |||
| Operating Humidity: | 15 – 95% RH | |||
| Loud Local Alarm: | 85 db at 10 feet | |||